News news
Location nowHome > News > Fountain Company introduces some misunderstandings in fountain construction

Fountain Company introduces some misunderstandings in fountain construction

Publish Time:2020/06/28 News 标签:fountain  companyNumber of views:708

In the process of fountains being widely used, some problems and deficiencies also appeared, and some misunderstandings and bad tendencies in understanding should arouse people’s attention. Otherwise, it will have a negative impact on the healthy development of the fountain company.


fountain company




1. The blindness in the design of the plan often leads to the failure of the work, making it difficult for the work to exist for a long time.

2. The unreasonable detail design directly affects the effect of the work.

3. Fake and inferior products with high quality and low price directly affect the credibility of relevant manufacturers and companies.

4. Issues of energy saving, water saving and environmental protection should attract enough attention.



The blindness in the design of the plan is to deviate from the actual situation of the locality, and seek to be large, complete, high, and first. The result is that the resulting fountain is not in harmony with the environmental atmosphere, which often leads to large investment, high operating costs, and poor results. the result of.

Good plan design requires professional designers of the fountain to fully listen to and absorb the suggestions and opinions of the planners, architects, gardeners, construction units and other relevant persons in the place where the fountain is located, and come up with reasonable plan design for the time and the place. The shape of the pool and water spray should form a harmonious relationship with the surrounding environment, space, architecture, and greening. It is not suitable for a quiet and elegant atmosphere to create a warm and active effect. Taking the laser color music fountain as an example, most foreign countries are usually located in tourist attractions parks or playgrounds and cultural parks, with seating for viewing, so that people can stop and enjoy. And some of our cities are located on roads or in traffic center areas where the space is small, the traffic volume is large, and there are no parking conditions. Obviously, this choice is unscientific and unreasonable. It is easy to cause traffic jams.

In addition, the ratio of the height of the water spray to the diameter of the pool, the sense of layering of various water shapes, should be properly grasped, to give people the natural beauty of the harmony between nature and environment, to avoid messy and simple stacking. These should be reasonably resolved when the plan is made.

The water shape of the fountain is realized through detailed design. The reasonable selection of the machine, pump, pipe, valve, and nozzle directly affects the water spray effect. The design of some fountains only pays attention to the technical indicators such as flow rate and working pressure, and ignores the important factor of flow pattern effect, and the water modeling effect is poor. For example, the successful ultra-high water column has a long dense section, short rupture section and atomization section, a suitable ratio of water column diameter and spray height, strong wind resistance, and strong and magnificent spray effect. However, some current ultra-high water columns have short dense columns, long rupture and atomization segments, and the diameter of the water column is small and thin compared with the height of the water jet, and the wind resistance is poor. The water column is easily blown away and drifted. This is the relevant parameter Unreasonable selection. There is also a similar problem in the combined effect of the overall water modeling. The unreasonable detail design is a manifestation of poor technical and economic indicators, and needs to be resolved at the design stage.

The quality of fountain products affects the use of fountains. In reality, products with the same model, specifications and origin are often encountered. The working parameters are different (more than the allowable error), and the quality of the fake products is poor. The service life is short, which increases the maintenance work and management costs of the user. It also damages the reputation of the relevant manufacturers and companies. Accelerating the formulation of relevant product standards and providing the operable content of product testing and quality supervision to manufacturers and users is an effective way to improve product quality.

Fountains are energy-consuming landscape projects. Some ultra-high water columns or large laser color audio-controlled fountains consume thousands or thousands of watts of power and lights. That is to say, as long as two hours a day, they will consume thousands of kilowatt-hours of electricity. Both the project investment and the maintenance and operation in the future are very expensive, and need to be carefully demonstrated and evaluated. Under the premise of guaranteeing the design effect, as much as possible to save energy, this should be tailored in the design stage of the program.

my country is a water-scarce country, and water saving is a basic national policy. The fountain company should promote circulating water, and the design should consider reducing spray atomization and drift losses. The circulating water system should have filtering and purification devices. Now there are many dry fountains. It is easy to spray the soil and dirt on the ground into the underground water pool with water spray. The water quality is very easy to pollute. Do a good job of water purification and extend the life cycle of the pool water. The pool water can be used to irrigate the surrounding lawns and green areas, which not only saves water but also has environmental protection functions.


Related recommendations