Daily Maintenance of Several Important Components of Music Fountain
Music fountain is an active fountain created for entertainment. It is designed according to aesthetics and often produces three-dimensional effects. In this process, the water is manipulated, scattered and refracted, and a three-dimensional picture is produced.
Everyone knows that the construction equipment of music fountain is mainly composed of water quality, sprinkler head, water pump, underwater color lamp and other components. Each component has its own unique characteristics and functions. No matter which component fails, it will affect the normal operation of fountain equipment. Let’s take a look at it.
1. Water quality of musical fountain construction equipment
The water quality of musical fountain construction equipment shall not exceed 15 degrees in chroma, and shall not show any other discoloration, turbidity shall not exceed 10 degrees, and shall not contain visible objects to the naked eye. The content of impurities in water is not more than 0.1%, the particle size of impurities is not more than 0.2 mm, the chloride ion content is not more than 400 mm/L, and the PH value is in the range of 6.5-8.5. At the same time, attention should be paid to the recycling of water for fountain equipment. When the nozzle is required, the recycling water should be filtered. The supplementary water quantity of the circulating system should be determined according to the loss of evaporation, air blowing, leakage and sewage discharge. Generally, 5%-10% of the circulating flow rate should be adopted.
2. Sprinkler head
The nozzle should be regularly cleaned and maintained. When installing, attention should be paid to the tightness of the connection between the nozzle and the pipeline. When the nozzle is sprayer, a raw material strip should be wrapped around the pipe thread to avoid leakage and affect the water spray effect. Meanwhile, the anti-theft measures for the sprinkler should be done well.
3. Underwater color lights
Underwater color lanterns are easily damaged components in fountain equipment, so the daily maintenance of color lanterns is also very important. The color lamp is best waterproof by heat shrinkable tube and hot sol; when assembling the color lamp, the connection between the color lamp and the lamp holder should be tight and not loose; when welding the lamp on the pipeline, the lamp must be welded tightly to prevent the lamp from falling off during use; after assembling, the lamp should be immersed in 5% salt water for 72 hours, and the measured resistance value can be used only after qualified.
The main causes of these phenomena are blockage of pipes without starting motor, rupture of pipes, blockage of filter network, water suction outlet coming out of water, reversal of electric pump and foreign matter in impeller. At this time, we must find out the fault first.The main causes of these phenomena are blockage of pipes without starting motor, breakdown of pipes, blockage of water suction outlet, reversal of electric pump and foreign matter in impeller. The reason is to clean up the fault or blockage, repair the line or replace the bearings, so that the pump can work properly.
- Pool Design Form of Fountain Equipment
- What is a laser music fountain
- How did the square music fountain come from?
- The choice of music fountain manufacturers...
- The popularity of fountain equipment has i...
- What are the differences in the control se...
- Key design points of fountain waterscape
- The Realization Method of Music Fountain A...