News news
Location nowHome > News > What faults will happen to fountain equipment

What faults will happen to fountain equipment

Publish Time:2020/06/22 News Number of views:12

Next Jiayue fountain company will introduce the fountain equipment failure to you. What is the relevant content?

 

fountain equipment

Fountain equipment failure:
1. The fountain water pump does not spray water, does not spray water less, interrupts the watering problem:
This kind of common failure may be caused by the following reasons: the water intake of the centrifugal pump is exposed on the river, the moisture absorption filter screen is blocked, the motor is turned over, and the centrifugal impeller is damaged seriously.n

 

Relative solutions: raise the water level line or reduce the centrifugal water pump, maintain the distance between the water intake and the river about 60mm; eliminate the dirt on the filter screen; adjust the phase sequence of the motor; check whether the sealing gasket of the connecting flange is damaged, check whether there is dirt in the pipeline, dismantle, replace and repair the pipeline; dismantle and replace the severely damaged centrifugal impeller.

 

2. The problem of swinging organization without posture:

 

The reasons for these problems may be: the water swing motor is destroyed, the linkage structure is broken or falls down.

 

Relative solutions are: check whether the motor is damaged, remove and replace; remove and replace the coupling rod, repair and adjust.

 

3. Common faults of frequent tripping of overload protector:

 

There are various possible reasons for this: the motor is overweight, the three-phase voltage is unbalanced, the motor winding is burnt, the motor bearing is damaged and jammed, and the cable is out of power.

 

The relative solutions are: check the motor repair if the current is too large; adjust the working voltage of the switch power supply; remove and replace the winding if the motor winding resistance is burnt; remove and replace the rolling bearing if the rolling bearing is damaged and stuck; check the cable route and repair.

 

Nowadays, music fountains, flower gardens and scenic spots in big cities can be said to be very common. Therefore, it is necessary to learn and train some simple solutions to common failures of music fountains. All music fountains and music fountains in normal work, if they occur, common failures will endanger the music fountains showing information.

 

Common fountain pump common faults: no spray, good sprinkler, temporary spray sprayer need not have such a common failure reasons for a while may be: centrifugal pump, water intake pipe on the upper side of the moisture absorption filter power plug, motor turnover, centrifugal impeller damage is more serious.

 

Relative solutions: raise the water level line or reduce the water level line of the centrifugal pump, maintain the distance between the water inlet pipe and the river about 60mm; eliminate the low-frequency oscillation of the absorption on the display screen; adjust the phase sequence of the motor; check whether the sealing rubber gasket of the flange plate of the supporting facilities is damaged, check whether there is dirt in the pipe, dismantle, replace and repair the pipe; seriously damage the centrifugal impeller.

 

Music fountain does not shake: shaking organization is not a pose problem: the reasons for such problems may be: shaking motor in water is damaged, crankshaft is broken or falls down.
The relative solutions are: check whether the motor is burnt, dismantle and replace; change the connection, repair and adjust.

 

Frequent trip overload protector common faults: so many kinds of possible reasons: motor load, three-phase voltage imbalance, winding burn, motor bearing damage, blocking, cable leakage.
The relative solutions are: too much power, check the motor maintenance; adjust the working voltage of the switch power supply; burn the motor winding resistance and change the winding resistance; dismantle and replace the rolling bearing when the rolling bearing is damaged; check the power circuit leaked by the cable and carry out maintenance. Music fountain square, embedded Music Fountain Square will encounter various problems, such as the selection of centrifugal pumps, water level control, etc. In the real estate industry and the urbanization development of the Waterscape fountain manufacturing industry obtained the development trend.

 

Is there anything else you don’t understand about the failure of fountain equipment? We must not take these problems lightly. If we neglect these problems, it will lead to more serious things!

Related recommendations
Name:
Email
Message:

RSS
Follow by Email
LinkedIn
Share